|
MIOX Products |
MIOX-Series Generators
The MIOX-25N, MIOX-50N and MIOX-100N series generators have passivated type 304 stainless steel cabinets for a rugged industrial design.
Cell modules can be arranged up to 4 per control cabinet. The system has built-in redundancy with a dedicated power supply and controller for each cell. The systems support external communications for remote display, datalogger download, remote control, or interface with SCADA systems. The brine generator can be configured for bag loading or bulk delivery from trucks.
|
MIOX-25N Series |
MIOX-50N Series |
MIOX-100N Series |
|
|
25 to 100 lbs/day FAC |
50 to 200 lbs/day FAC |
100 to 400 lbs/day FAC |
|
| |
|
The MIOX-250N and the MIOX-500N series generators have unlimited cell redundancy.
The 250N and 500 N are built in the same passivated type 304 stainless steel cabinets with a dedicated power supply and controller for each cell. The systems support external communications for remote display, datalogger download, remote control, or interface with SCADA systems. The brine generator can be configured for bag loading or bulk delivery from trucks.
|
MIOX-250N Series |
MIOX-500N Series |
|
|
250 lbs/day FAC Per Cell |
500 lbs/day FAC Per Cell |
|
HYPO-Series Generators
The HYPO-50N, HYPO-100N and HYPO-200N series generators also have passivated type 304 stainless steel cabinets.
Cell modules can be arranged up to 4 per control cabinet.
The system has built-in redundancy with a dedicated power supply and controller for each cell. The systems support external communications for remote display, datalogger download, remote control, or interface with SCADA systems. The brine generator can be configured for bag loading or bulk delivery from trucks.
|
|
HYPO-50N Series |
HYPO-100N Series |
HYPO-200N Series |
|
|
50 to 200 lbs/day FAC |
100 to 400 lbs/day FAC |
200 to 800 lbs/day FAC |
|
| | |
|
The HYPO-500N and the HYPO-1000N series generators have unlimited cell redundancy.
The 500N and 1000N are built in passivated type 304 stainless steel cabinets with a dedicated power supply and controller for each cell. The systems support external communications for remote display, datalogger download, remote control, or interface with SCADA systems. The brine generator can be configured for bag loading or bulk delivery from trucks.
|
|
HYPO-500N Series |
HYPO-1000N Series |
|
|
500 lbs/day FAC Per Cell |
1000 lbs/day FAC Per Cell |
|
MSR MIOX Purifier
The MSR MIOX Purifier is a hand-held portable device ideal for outdoor enthusiasts, travelers and military personnel.
The MSR MIOX Purifier occupies only 14% of the space required by a typical portable water treatment filter and is ¼ the weight. The device operates by converting a brine solution to a mixed-oxidant solution via electrolysis. Each purifier utilizes two 3V lithium camera batteries, common salt and a tiny electrolytic cell. The purifier will treat approximately 200 liters of water on one set of batteries. The purifier can be used over and over, making water treatment an inexpensive procedure after the initial purchase.
An important feature of using simple salt as the disinfectant source is that salt has an infinite shelf life, so the purifier will still function even if stored without use for a long period of time. (The batteries have a 7-10 year shelf life.) The disinfectant will inactivate a number of common pathogens, including E. coli, Giardia and Cryptosporidium, as well as chemical and biological warfare agents (refer to inactivation table below). The purifier has passed the EPA Guide Standard and Protocol for microbiological purifiers, achieving more than 10 times the level of inactivation required, even in the EPA's "worst-case" water.
|
MSR MIOX Purifier |
|
|
Settings to treat 1/2 liter, 1 liter, 2 liters and 1 gallon
|
|
|
|
|
SAL Systems
The SAL-30, SAL-40 and SAL-80 systems are automated units appropriate for smaller water supplies or well sites.
The control panel is mounted on the wall with the electrolytic cell, water manifold, brine pump and filter mounted below. The brine tank, oxidant tank and water softener stand alone and are sized based on water system requirements. Any of these units can be wired for a remote alarm and also have the capability for remote display.
|
SAL- 30 / SAL- 40 |
|
|
2.5 to 4 lbs/day FAC |
|
|
|
|
|
|
Government Systems
P3 System
The P3 system is a self-contained, portable package plant that provides filtration, disinfection and monitoring for turbidity and chlorine residual, as required by the U.S. EPA Surface Water Treatment Rule.
|
P3 System |
|
|
0.5 lbs/day FAC |
|
|
|
|
The unit will fit in the bed of a pickup truck and is transportable by two persons. The system can be operated off AC or solar power and can operate for 30 days without service. Datalogging capability is included. The U.S. Forest Service has approved use of the MIOX P3 system for their campgrounds.
|
|
| |
|
Marine-40
The Marine-40 is integrated by Howell Labs into their Model 7060 MEDG for potable water disinfection on Navy ships.
|
Model 7060 MEDG |
|
|
4 lbs/day FAC |
|
|
|
ROWPU
The ROWPU integration unit is designed for use with the US Army's 3,000 gph Reverse Osmosis Water Purification Units for final disinfection and reduced biofouling on membranes.
|
ROWPU System |
|
|
Treats 3,000 gph flow |
|
|
OTHER SYSTEMS
AE System
The AE system is a semi-automated unit
|
AE-1 system |
AE-4 system |
|
1 lbs/day FAC |
4 lbs/day FAC |
|
|
The simple operation and low capital cost make it ideal for small rural and remote communities, or worker camps.
The unit utilizes grid, solar, or generator power.
|
|
Brine Pump System (BPS)
The BPS is a completely self-contained, non-automated system that is ideal for emergency response situations, small resorts and point of entry. The BPS can be set up at any location to provide a fresh disinfectant solution in a manner of seconds.
|
BPS System |
 |
0.5 lbs/day FAC |
|
|
|
The lightweight portable case has a hard plastic cover to protect the system components. Separate containers must be used to store the brine solution, which is manually mixed to the proper consistency and to collect the disinfecting oxidant solution as it is generated from the cell.
The unit has a terminal plug for 110 or 220 VAC operation and also 2 posts for connection to a 12 VDC battery. The necessary tubing is included with the unit and stores neatly in the lid.
|
|
|
